Display during playback

1.Set the mode select dial to Photo ().

Note:

*When the power is already turned on with Playback () or set up (SET UP), set the mode select dial to Photo () to cancel these two modes and open the lens cover automati- cally.

2.Press the power button.

The lens cover will open automatically.

3.Press the LCD monitor power button (LCD POWER). The through image will appear on the LCD monitor.

Caution

Always turn the LCD monitor on when selecting the 4-frame continuous shooting mode.

4.Press the menu button once to enable menu selection (“Set Camera Exposure” setting screen). The through image will become a still image.

5.Press the select buttons (, ) and, change to the “Continuous shooting” menu. The 4-frame continuous shooting menu icon will be displayed highlighted in the upper center part of the LCD monitor.

6.Press the Set/Zoom button once.

The 4-frame continuous shooting mode icon will appear in the center of the LCD monitor. Among the 4 modes (Standard →Low-speed→Medium-speed→High-speed); the currently se- lected mode will appear in highlighted. The standard mode (not the continuous shooting mode) will be displayed with the initial setting. The intervals are low-speed (L;2 frames/sec.),