Installing the Batteries/Special Lithium-ion Battery and the Special Adapter for Q-M200 (Option)

* Use of the lithium-ion battery is recommended.

First, press the camera power button and the LCD monitor button to turn both off.

1.Open the battery cover on the bottom by pushing the battery cover lock button in the direction of the arrow mark.

Warning

Do not perform this operation with wet hands because there is danger of electrical shock.

2.Load the batteries.

•Ordinary AA batteries

Load 3 AA batteries with the electrodes correctly aligned with the indications

inside the battery compartment.

Caution:

Incorrect polarity orientation might cause the batteries to leak or heat, resulting in physical injury, smear, or damage to the camera.

Note:

Two different types of batteries can be used: AA alkaline and AA NiMH (3 each).

With Size AA alkaline batteries, the camera can shoot about 10 pictures (if the LCD monitor is turned on) or about 150 pictures (if the LCD monitor is turned off) and plays recorded pictures continuously for about 20 minutes (all under our defined test conditions).