Basic functions
4.In the upper DRAWBAR SELECT section, hold down the [DRAWBAR 1] key and press the [DRAW- BAR PRESET] key.
The Drawbar 1 settings will be copied to the “UPPER” parameters, and an “
” will appear between the program number and program name.
5.Press the [WRITE/ENTER] key to write the settings into internal memory.
For details, refer to “Writing a program” (p.19).
The upper DRAWBAR SELECT section can be used to copy drawbar parameters in EX mode as well. Create the sound in the upper keyboard, then hold down the upper [DRAWBAR 1] or [DRAWBAR 2] key, and press the [DRAWBAR PRESET] key.
Copying a program
This is convenient when you want to create several variations of a program by making small changes to the parameter settings.
1.Press the [GLOBAL] key to enter the Global mode.
2.Press the PROGRAM [7] key, and then press the [®] key once.
The display will indicate Copy Swap Init.
3.Press the [WRITE/ENTER] key.
In the display, “Copy” will blink, and the copy source and copy destination program numbers will appear at the right.
7.Press the [WRITE/ENTER] key.
A message will ask you to confirm the copy. If you decide to cancel, press the [EXIT] key.
8.Press the [WRITE/ENTER] key once again.
When the program has been copied, the display will indicate Copy Completed.
Swapping two programs
This operation exchanges two programs. This is conve- nient when you want to rearrange the order of the programs.
1.Press the [GLOBAL] key to enter the Global mode.
2.Press the PROGRAM [7] key, and then press the [®] key once.
The display will indicate Copy Swap Init.
3.Press the [WRITE/ENTER] key, and then press the
[+] key once.
“Swap” will blink in the display. The
4.Press the [®] key once, and the Speaker icon will appear at the left of the
You can play the keyboard to hear the sound of the program.
5.If you want to change the swap source, use the
6.If you want to change the swap destination, press the [®] key once, and then use the
7.Press the [WRITE/ENTER] key.
A message will ask you to confirm the swap. If you decide to cancel, press the [EXIT] key.
8.Press the [WRITE/ENTER] key once again.
When the swap is completed, the display will indicate Swap Completed.
4.Press the [®] key once, and the Speaker icon will appear at the left of the
You can play the keyboard to hear the sound of the program.
5.To change the
6.To change the
The Speaker icon will appear at the left of the copy- destination program number.
Editing the name of a program
1.Press the [EDIT] key to enter Normal Edit mode or EX Edit mode.
2.Press the PROGRAM [8] key.
“Rename” will appear in the left of the display, and the program name will be displayed in square brack- ets [ ].
3.Use the [√ ] [®] keys to select the character that you want to change.
22
