Korg BX-3 manual Group 4 Midi CC#

Parameters

MIDI Rx C. Change (MIDI Receive Control Change) [Dis, Ena]

Dis (Disable): Incoming MIDI control changes will be ignored.

Ena (Enable): Incoming MIDI control changes will be received. (The factory setting is Ena.)

MIDI Tx C. Change (MIDI Transmit Control Change) [Dis, Ena]

Dis (Disable): MIDI control changes will not be transmit- ted.

Ena (Enable): MIDI control changes will be transmitted. (The factory setting is Ena.)

MIDI Local Cntrl (MIDI Local Control) [Off, On]

Turns local control on/off. (The factory setting is On.) Off: The keyboard will be internally disconnected from the tone generator section. Select this setting when you want to use the keyboard and controllers of the BX-3 only to play a different tone generator.

Group 4: MIDI CC# 1

CC# Upper DB Sel (MIDI CC# Upper Drawbar Select) [1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the UPPER setting of the DRAWBAR SELECT section. (The factory setting is 79.)

CC# Lower DB Sel (MIDI CC# Lower Drawbar Select) [1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the LOWER setting of the DRAWBAR SELECT section. (The factory setting is 80.)

CC# Drawbar 1 16’ (MIDI CC# Drawbar 1–16’)

[1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 16' setting of Drawbar 1. (The factory setting is 16.)

CC# Drawbar 1 51/3’(MIDI CC# Drawbar 1–5-1/3’) [1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 5-1/3' setting of Drawbar 1. (The factory setting is 17.)

CC# Drawbar 1 8’(MIDI CC# Drawbar 1–8’)

[1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 8' setting of Drawbar 1. (The factory setting is 18.)

CC# Drawbar 1 4’(MIDI CC# Drawbar 1–4’)

[1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 4' setting of Drawbar 1. (The factory setting is 19.)

CC# Drawbar 1 22/3’(MIDI CC# Drawbar 1–2-2/3’) [1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 2-2/3' setting of Drawbar 1. (The factory setting is 20.)

CC# Drawbar 1 2’(MIDI CC# Drawbar 1–2’)

[1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 2' setting of Drawbar 1. (The factory setting is 21.)

CC# Drawbar 1 13/5’(MIDI CC# Drawbar 1–1-3/5’) [1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 1-3/5' setting of Drawbar 1. (The factory setting is 22.)

CC# Drawbar 1 11/3’(MIDI CC# Drawbar 1–1-1/3’) [1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 1-1/3' setting of Drawbar 1. (The factory setting is 23.)

CC# Drawbar 1 1’(MIDI CC# Drawbar 1–1’)

[1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 1' setting of Drawbar 1. (The factory setting is 24.)

CC# Drawbar 2 16’(MIDI CC# Drawbar 2–16’)

[1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 16' setting of Drawbar 2. (The factory setting is 70.)

CC# Drawbar 2 51/3’(MIDI CC# Drawbar 2–5-1/3’) [1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 5-1/3' setting of Drawbar 2. (The factory setting is 71.)

CC# Drawbar 2 8’(MIDI CC# Drawbar 2–8’)

[1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 8' setting of Drawbar 2. (The factory setting is 72.)

CC# Drawbar 2 4’(MIDI CC# Drawbar 2–4’)

[1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 4' setting of Drawbar 2. (The factory setting is 73.)

CC# Drawbar 2 22/3’(MIDI CC# Drawbar 2–2-2/3’) [1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 2-2/3' setting of Drawbar 2. (The factory setting is 74.)

CC# Drawbar 2 2’(MIDI CC# Drawbar 2–2’)

[1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 2' setting of Drawbar 2. (The factory setting is 75.)

CC# Drawbar 2 13/5’(MIDI CC# Drawbar 2–1-3/5’) [1...31, 33...95, Off]

Specifies the MIDI control change number that will be used to transmit and receive the 1-3/5' setting of Drawbar 2. (The factory setting is 76.)

32