Program Edit P5
This section provides four general purpose EGs (envelope generators). The four EGs can be used as
modulation sources for the parameters of other sections to create time-variant change in the sound.

5–1: EG 1

5–1a: Level

Start (Start Level) [–99…+99]
Specifies the value at the time of note-on.
Attack (Attack Level) [–99…+99]
Specifies the value that will be reached after the Attack Time has elapsed.
Break (Break Level) [–99…+99]
Specifies the value that will be reached after the Decay Time has elapsed.
Sustain (Sustain Level) [–99…+99]
Specifies the value that will be reached after the Slope Time has elapsed.
Release (Release Level) [–99…+99]
Specifies the value that will be reached after the Release Time has elapsed.

5–1b: Time (Amp EG Time)

Attack (Attack Time) [0…99]
Specifies the time from note-on (when a note is played) until the value reaches the attack level. With a value of
0, the value will change instantly. With a value of 99, the value will change slowly.
5-1: EG 1
Parameters
Prog.
Edit
P5
Note-off
Attack level Sustain level
Note-on
Attack
time Decay
time Slope
time Release
time
Time
Break
level
0
-99
+99
5–1a
5–1b
5–1c
5–1d
5–1e
AMSource