Korg Synthesizer manual KTr Damp Keyboard Track 99…+99, Intensity Damp AMS Intensity 99…+99

2:1 OSC 1 (12: Plucked String Model)

KTr (Damp Keyboard Track) [–99…+99]

Specifies how the Damp amount will be affected by the keyboard location.

With positive (+) settings, the Damp value will increase as you play notes above C4. With negative (–)settings, the Damp will decrease as you play notes above C4.

Damp
99		+99
		+50
25		0
0	-50
	C4 -99
C-1		C9

when Damp=25

Damp		+99 +50
99
50		0
0	-99	-50
C-1	C4	C9

when Damp=50

Damp
99	+99 +50
75		0
		-50
0		-99
C-1	C4	C9

when Damp=75

AMS (Alternate Modulation Source)	[OFF…MIDI (CC#83)]
Selects a modulation source (☞ page 64 of this manual) that will control “Damp.”
Intensity (Damp AMS Intensity)	[–99…+99]
Specifies the depth and direction of the effect that “AMS” will have.

Decay [0…99]

Specifies the decay time over which the sound will decay if you continue pressing a note. Higher settings of this value will produce a longer decay time.

Depending on the settings of “4-2: Amp EG”, the setting you make here may not have audible results. If you raise the EG break level and sustain level, it will be easier to hear the result of this setting.

KTr (Decay Keyboard Track) [–99…+99]

Specifies how the Decay amount will be affected by the keyboard location.

With positive (+) settings, the decay will become faster as you play notes above C4. With negative (–)settings, it will become

slower.

Decay
99	+99
		+50
25	-50	0
0
	C4 -99
C-1		C9
	when Decay=25

Decay
99	+99	+50
50		0
0	-99	-50
C-1	C4	C9

when Decay=50

Decay
99	+99 +50
75		0
		-50
0		-99
C-1	C4	C9

when Decay=75

Release [0…99]

Specifies the length of time over which the sound will decay after you release the note. Higher settings of this value will produce a longer release time.

Depending on the settings of “4-2: Amp EG”, the setting you make here may not have audible results. You may need to raise the EG release level, it will be easier to hear the result of this setting.