Decay (Decay Time) [0…99]
Specifies the time from when the attack time ends until the Break Level is reached.
Slope (Slope Time) [0…99]
Specifies the time from when the decay time ends until the Sustain Level is reached.
Release (Slope Time) [0…99]
Specifies the time from note-off (when a note is released) until the Release Level is reached.
5–1c: Level Control
Velocity [–99…+99]
Specifies the depth and direction of the effect that velocity will have on the EG levels.
5–1d:Level Modulation
AMS (Alternate Modulation Source) [OFF…MIDI (CC#83)]
Selects a modulation source (☞page 64 of this manual) that will control the level of EG1.
Intensity (EG Level AMS Intensity) [–99…+99]
Specifies the depth and direction of the effect that “AMS” will have on the EG levels.
5–1e: Time Modulation
AMS.1 (Alternate Modulation Source 1) [OFF…MIDI (CC#83)]
Selects a modulation source 1 (☞page 64 of this manual) that will control the EG1 times.
Intensity (EG Time AMS.1 Intensity) [–99…+99]
Specifies the depth and direction of the effect that “AMS.1” will have on the EG times.
AMS.2 (Alternate Modulation Source 2) [OFF…MIDI (CC#83)]
Selects a modulation source 2 (☞page 64 of this manual) that will control the EG1 times.
At (Attack Time AMS.2 Intensity) [–99…+99]
Dc (Decay Time AMS.2 Intensity) [–99…+99]
Sl (Slope Time AMS.2 Intensity) [���99…+99]
Rl (Release Time AMS.2 Intensity) [–99…+99]
Specifies the depth and direction of the effect that “AMS.2” will have on each EG time.

5-1: EG 1

When "Velocity" is set to a positive (+) value
Note-on Note-off Note-on
Note-off
Note-on Note-off
Settings of EG1 Softly played notes Strongly played notes
When the various EG times are set to negative (–) values
Note-on
Note-off
Note-on
Note-off
Note-on
Note-off
Settings of EG1 Softly played notes Strongly played notes