BackPanel
Description
See Figure 2 on page11
22 BalancedChannelOutputs
The Audio + Vid~p Standard is equipped with nine channel~utputs. All nine channels
are equippedwith balancedoutputs via XLR connectorsas well as
TheXLRpin configurationsare as follows:
Pin 1" Shield(g~round)
°,)
Pin 2:
°
Pin 3:) InvertiNg(180
23 AnalogTapeInput
The Audio + Video Standard is equipped with
24 BalancedAnalogInputs
The Audio + Video Standard is equipped with onebalanced input (labeled B1) via XLRconnectors.
TheXLRpin configurationsare as follows:
Pin 1: Shield(ground)
°)
Pin 2:
°
Pin 3:) Inverting (180
25 Single-EndedAnalogInputs
The Audio + Video Standard is equipped with five
26 RF Inputs
TheAudio+ VideoStandardis equippedwith an RFinput for use with the Dolby Digital
Connections are via RCAor BNCcoaxial digital cable.
27
The Audio + Video Standard is equipped with four
28 S-Video Outputs
The Audio + Video Standard is equipped with three
29 Infrared RemoteSensors
The Audio + Video Standard is equipped with an additional infrared sensoranda male
30 Single-EndedChannelOutputs
The Audio + Video Standard is equipped with nine channeloutputs. All nine channels are equippedwith
RCAconnectors as well as balanced con- nectors (22). Thenine channeloutputs are
for the center,left, right, left andright side, left andright rear, andtwo subwooferout- puts (labeled Sub1,Sub2).
31 Digital AudioOutputs
The Audio + Video Standard is equipped with twodigital audiooutputsin the following formats:
Onecoaxial via RCAconnector
OneTM TosLink
32 Tape Outputs
The Audio + Video Standard is equipped with three analogtape outputs. Twoare for use with video sources (labeled VCR1, VCR2),and.thethird is for usewith an audio tape deck(labeled tape).
®
KRELL Audio + Video StandardEnglish Page9 of 32