>TCP/IP (IPv6) > On
>>RA(Stateless) Off
>>DHCPv6 Off
>>RA(Stateless)
?Off
>>DHCPv6
?Off
Security >
TCP/IP (IPv6)
This section describes how to enable the TCP/IP (IPv6) protocol.
1If TCP/IP (IPv6) is set to Off, use U or V to selecto On and press [OK].
2Press Z. Each time you press U or V, the selection changes.
3Display the item you want to set and press [OK]. A blinking question mark (?) appears while you are setting RA(Stateless) and
DHCPv6.
4Press U or V to select On or Off as the setting for RA(Stateless) and DHCPv6.
Note Check with your network administrator for the network address settings.
5Press [OK].
6Press [MENU]. The display returns to Ready.
NetWare, AppleTalk, IPP, SSL Server, IPSec and Security Level settings
1Press [MENU].
2Press U or V repeatedly until Security > appears.
Printing Operation |
