General Information
This chapter describes basic maintenance tasks you can perform on the printer. You can replace the following component according to the printer’s display:
•Toner Kits
•Waste Toner Box
Also, the following parts need periodic cleaning:
• Paper Transfer Unit
Note Information Collection on Memory Chips - The memory chip attached to the toner container is designed to improve convenience for the end user; to support the recycling operation of empty toner containers; and to gather information to support new product planning and development. The information gathered is anonymous - it cannot be associated to any specific individual and the data is intended to be used anonymously.
Toner Container Replacement
The toner container in the printer should be replaced as soon as the message display shows Toner low or soon after. If you continue to use the printer, eventually the toner supply will be exhausted at which point the printer will stop printing and the Replace toner C,M,Y,K message will be shown instructing you to install a new toner kit.
Frequency of Toner Container Replacement
The life of the toner containers depends on the amount of toner required to accomplish your printing jobs. According to ISO/IEC 19798 and EcoPrint switched off the toner container can print as follows (A4/Letter paper is assumed):
Toner Color | Life of the Toner Container (Printable pages) |
|
|
Black | 5,000 images |
|
|
Cyan | 4,000 images |
|
|
Magenta | 4,000 images |
|
|
Yellow | 4,000 images |
|
|
| |
|
|
Toner Color | Life of the Toner Container (Printable pages) |
|
|
Black | 7,000 images |
|
|
Cyan | 6,000 images |
|
|
Magenta | 6,000 images |
|
|
Yellow | 6,000 images |
|
|
Maintenance |
