>SSL Server | > |
On |
|
|
|
>>DES Off
>>3DES Off
>>AES Off
>>IPP over SSL Off
>>HTTPS Off
>>DES
?Off
>IPSec On
>IPSec
?On
SSL Server
This section explains the procedure for enabling SSL Server.
1Enter the administrator ID and password. Then, if SSL Server is set to Off, use U or V to select On and press [OK].
2Press Z. Each time you press U or V, the selection changes.
3Display the item you want to set and press [OK]. A blinking question mark (?) appears.
4Select On or Off using U or V.
5Press [OK].
6Press [MENU]. The display returns to Ready.
IPSec
This section explains the procedure for enabling IPSec.
1Enter the administrator ID and password. Then, if IPSec is set to Off, use U or V to select On.
2Press [OK]. A blinking question mark (?) appears.
3Press [OK] again.
4Press [Menu]. The display returns to Ready.
Printing Operation |
