13USING THE CAMERA

Tips before operating your camera

You cannot activate the camera while on a call.

Once the camera is active, the main screen acts as the viewfinder.

If you get a “Low memory” error, check your resolution and quality compression settings. See “Setting up the camera” on this page.

If there is no activity within 45 seconds after you turn your camera on, the camera quits and returns to the previous screen.

Accessing picture mode

1.Flip open

2.Press and hold until you hear two beeps to activate picture mode.

Camera settings

1.Press and hold to activate picture mode.

2.Press to select Options.

3.Press to select Settings.

4.Highlight an option and press :

Flash options are Off, On, or Automatic.

Resolution options are 640 x 480,

320 x 240 (best for sending to email),

160 x 120 and 1280 x 1024.

Low Light Mode brightens the picture for low light environments.

Self Timer options are Off (default) or 3, 5, or 10 second pauses. When set, the camera beeps from 3 seconds down to the time the shutter snaps the picture automatically. Self Timer is not available when Multishot mode is activated.

Multishot allows you to take up to six multiple pictures while the camera key is pressed and held. A tone plays each time a picture is taken. A second tone plays when the final picture is taken.

Shutter Sound sets the sound used when the camera takes a picture.

White Balance allows the camera to adjust for different lighting. Options are Automatic, Incandescent, Fluorescent, Daylight, and Darkness.

Color Tone allows you to capture pictures with different coloring. Options are Normal, Black & White, Negative,

and Sepia.

48

Using the Camera

Page 56
Image 56
Kyocera K325 manual Tips before operating your camera, Accessing picture mode, Camera settings, Using the Camera, Sepia