Kyocera K325 manual Installing the battery, Charging the battery, Getting Started

1GETTING STARTED

Installing the battery

Your Cyclops phone comes with a removable lithium ion (LiIon) battery. Fully charge the

battery before using the phone.

To install the battery:

1.Hold the phone face down.

1. Place your thumb on the ribs at the top of the battery door and slide the battery door downward to remove it

2. Place the battery in the phone casing with the metal contacts facing towards the bottom end of the phone.

3.Replace the battery door by sliding the notches into the openings at the bottom and outside edges of the battery casing.

4.Slide the door up to secure the cover into place.

Charging the battery

You must have at least a partial charge in the battery to make or receive calls.

To charge the battery:

1.Connect the AC adapter to

the jack on the bottom of the phone. Do not force the AC adapter into the jack. Make sure the arrow is face up

as shown.

2.Plug the adapter into a wall outlet.

The battery icon in the upper right corner of the screen tells you whether the phone is:

•Charging (the icon is animated)

•Partially charged

•Fully charged

Note: The battery will not charge if you use the phone while it is connected to an AC adapter.

Note: You must use a Kyocera-authenticated battery in your phone. If you attempt to use a battery that has not been authenticated you will receive a security warning. Contact Virgin Mobile to obtain a Kyocera-authenticated battery.

User Guide for the Cyclops Phone 1