Kyocera KM-3650w operation manual Measures against environmental condition

1. 6. 3 Measures against environmental condition

Take measures to meet with the environmental condition as shown below.

Humidity	Possible problem	Measures
(%)
Low	“Void of image”, “crease of paper” and	1.	Install the humidifier in the room, and
	other problems occurs when you print		humidify the room air.
	with plain paper and tracing paper.	2.	Remove the paper from the machine
			right after the completion of print, and
			keep it in a polyethylene bag.
	“Void of image” occurs when you print	If you will not make print soon, remove
	with tracing paper.	the tracing paper from the machine and
40%		keep it in a polyethylene bag.
		Remove the paper from the machine after
		everyday use, and keep it in a
70%		polyethylene bag.
	“Void of image” occurs when you print	If you will not make print soon, remove
	with plain paper and tracing paper.	the tracing paper from the machine and
		keep it in a polyethylene bag.
	“Void of image”, “crease of paper” and	1.	Turn on the Dehumidify Heater of the
	other problems occurs when you print		KM-3650w.
	with plain paper and tracing paper.	2.	Remove the paper from the machine
High			right after the completion of print, and
			keep it in a polyethylene bag.

NOTE

(1)The machine is not equipped with the Dehumidify Heater initially as it is an optional part. (You need to purchase it separately.)

Turn it on when the humidity is higher than 65%.

Refer to [2. 8 Dehumidifying the Roll Paper (Option)] on page 2-18 for the detail.

(2)“Void of image” and “crease of paper” are the most popular problem you will encounter when the humidity condition is very high or very low.

Normal Print Crease of paper

If the media is humidified ;

Normal Print Void of image

If the media is humidified ;

1-14 Chapter 1 Before Use