2.Insert the leading edge of roll paper under the under the Guide Plate (1) until the edge touches the feeding roller.
Rotate the Paper Feeding Knob (2) clockwise so that the feeding rollers catch the roll paper.
1
2
NOTE
(1)If the leading edge is extremely torn or folded, cut it off with a cutter or scissors.
(2)Rotate the Paper Feeding Knob of rear
side (3) for the Roll 2.
3
3.When the feeding rollers catch the paper, hold and pull the dent part (4) to the arrow direction to open the paper guide, and rotate the Paper Feeding Knob (2) until the leading edge comes out from the slit about 10cm.
4
Leading edge of roll paper
2
Chapter 3 Error Correction |
