7.Insert the leading edge of roll paper under the Guide Plate (9) until the edge touches the feeding roller.
Then rotate the Paper Feeding Knob (10) clockwise so that the feeding rollers catch the roll paper.
9
10
NOTE
In case of Roll 2, rotate the Paper Feeding Knob of rear side (11).
11
8.When the feeding rollers catch the paper, hold and pull the dent part (12) to the arrow direction to open the paper guide, and rotate the Paper Feeding Knob (10) until the leading edge comes out from the slit about 10cm.
12
Leading edge of roll paper
10
Chapter 2 Basic Operations |
