Kyocera S-9100DN manual Hard Disk

Chapter 3 Using the Operator Panel

9	Repeat above steps until you have transferred all data
	(files) that you want to write to the hard disk. Each time

you finish writing data, a hard disk write information page is printed from the printer showing the information explained in step 8 above, but pertaining only to the data just written. To see all data contained in the hard disk at once, print a list of data names as explained. See Printing a List of Data Names on page 3-33.

Deleting Data

It is possible to use the printer to delete data from a hard disk one by one. To delete data from a hard disk, proceed as follows.

Check that the hard disk contains data. Otherwise, the >Delete Data menu will not appear on the message display.

1	Press the MENU key.
2	Press the 3 or 4 key repeatedly until Hard Disk >
	appears.
	Hard Disk		>
3
	Press the 2 key.
4	Press the 3 or 4 key repeatedly until >Delete Data
	appears. The data name also appears.
	>Delete Data
		DataH001
5
	Press the ENTER key. A blinking question mark (?) ap-
	pears before the data name.
	>Delete Data
6		?DataH001
	Press the 3 or 4 key to display the desired data name.
7	Press the ENTER key. Processing appears and the
	data is deleted from the hard disk. The message dis-

play returns to Ready.

Printing a List of Data Names

The printer prints a list of all data names (referred to as parti- tions) stored in a hard disk for reference. To print a list of data names for the hard disk, proceed as follows.

1 Press the MENU key.

2	Press the 3 or 4 key repeatedly until Hard Disk >
	appears.
	Hard Disk	>
3
	Press the 2 key.
4	Press the 3 or 4 key repeatedly until >List of Par-
	titions appears.
	>List of
	Partitions
5
	Press the ENTER key. A question mark (?) appears.
	>List of
	Partitions	?
6
	Press the ENTER key. Processing appears and the
	printing of the list starts.

FS-9500DN Page Printer

PARTITION LIST

Device Information

Partition Information

The printout (example above) includes the following information;

Device Name/Number: HARD DISK/0 is indicated for

	the hard disk.
Capacity:	The total capacity of the hard disk in
	bytes.
Used Space:	The total size of the data stored in the
	hard disk in bytes.
Free Space:	The size of the capacity remaining in
	the hard disk for storing further data,
	including the amount of memory that
	the printer uses for its system.
Partition Name:	The name of the written data
	assigned automatically by the printer.
Partition Size:	The size of the written data in bytes.
Partition Type:	The type of the written data i.e.,
	whether it is host data (Data) or font
	data (Font).

When the list of file names (partition list) for the hard disk is printed, the message display returns to Ready.

It also prints out the Directory Status List to confirm the directory or data that is written in PJL or KPDL (PostScript).

3-33