Kyocera S-9100DN Installation Precautions, QEnvironment, QPower Supply/Grounding the Printer

Installation Precautions

QEnvironment

CAUTION

•Avoid placing the printer on or in locations which are unstable or not level. Such locations may cause the printer to fall down or fall over. This type of situation presents a danger of personal injury or damage to the printer. .........................................................................

•Avoid locations with humidity or dust and dirt. If dust or dirt becomes attached to the power plug, clean the plug to avoid the danger of fire or electrical shock. .....

•Avoid locations near radiators, heaters, or other heat sources, or locations near flammable items, to avoid the danger of fire. ........................................................

•To keep the printer cool and facilitate changing of parts and maintenance, allow access space as shown below. Leave adequate space, especially around the left cover, to allow air to be properly ventilated out of the printer. ...................................................................

Rear: =>10 cm (3-15/16")
Left:	Right:
	=>70 cm
=>60 cm (23-5/8")
	9	/16")
	(27-
Front: >=100 cm (39-3/8")

•Always use the caster stoppers to stabilize the printer once it is in place to keep it from moving and/or falling over and causing injury. ..............................................

Other Precautions

•Adverse environmental conditions may affect the safe operation and performance of the printer. Install in an air-conditioned room (recommended room tempera- ture: around 20 °C, humidity: around 65 % RH) and avoid the following locations when selecting a site for the printer.

•Avoid locations near a window or with exposure to di- rect sunlight.

•Avoid locations with vibrations.

•Avoid locations with drastic temperature fluctuations.

•Avoid locations with direct exposure to hot or cold air.

•Avoid poorly ventilated locations.

•If the floor is delicate against casters, when this prod- uct is moved after installation, the floor material may be damaged.

QPower Supply/Grounding the Printer

WARNING

•DO NOT use a power supply with a voltage other than that specified. Avoid multiple connections in the same outlet. These types of situations present a danger of fire or electrical shock. ................................................

•Plug the power cord securely into the outlet. If metallic objects come in contact with the prongs on the plug, it may cause a fire or electric shock. .............................

•Always connect the printer to an outlet with a ground connection to avoid the danger of fire or electrical shock in case of an electric short. If an earth connec- tion is not possible, contact your service representa- tive. .............................................................................

Other Precautions

•Connect the power plug to the closest outlet possible to the printer.

QHandling of Plastic Bags

WARNING

•Keep the plastic bags that are used with the printer away from children. The plastic may cling to their nose and mouth causing suffocation. ..................................

8