Lantronix LPS1-T Define Service DLC EN/DIS, Banner EN/DIS, Binary EN/DIS, Formfeed EN/DIS, En/Dis

Server Commands		Frequently-used Commands
Table F-1:Frequently-used Server Commands, cont.
Command	Option(s)	Description
DEFINE SERVICE	DLC {EN/DIS}	Specifies which service will handle print
“name” option		requests from DLC hosts. DLC can be enabled
		on one service per MPS.
	BANNER {EN/DIS}	When Enabled, causes the MPS to print a ban-
		ner page before jobs.
	BINARY {EN/DIS}	When Enabled, the MPS will not process data
		passed through the service. This characteristic
		should be enabled when printing PCL data.
	EOJ string	Causes the MPS to send an end-of-job string to
		the attached device after every job. Enter an end
		string or the word none.
	FORMFEED {EN/DIS}	When Enabled, causes the MPS to append a
		formfeed to the end of LPR print jobs.
	POSTSCRIPT	When Enabled, causes the MPS to assume the
	{EN/DIS}	attached device is a PostScript device and act
		accordingly.
	PSCONVERT {EN/DIS} When Enabled, causes the MPS to place a Post-
		Script wrapper around each job.
	SOJ string	Causes the MPS to send a start-of-job string to
		the attached device before every job. Enter a
		start string or the word none.
DEFINE SERVICE	TCPPORT string	Specifies a raw TCP listener socket for the ser-
“name” option		vice. Enter a socket number (4000 to 4999) or
		the word none.
	TELNETPORT string	Specifies a TCP listener socket for the service.
		Unlike TCPport, this option performs Telnet
		IAC interpretation on the data stream. Enter a
		socket number (4000 to 4999) or the word none.
INITIALIZE option	DELAY num	Schedules a reboot after num minutes. Enter a
		value from 0 to 120.
	CANCEL	Cancels an impending initialization.
	FACTORY	Reboots the MPS to its factory default settings.
	NOBOOT	Forces the MPS to stop in Boot Configuration
		Mode rather than fully rebooting.
	RELOAD	Forces the MPS to download new operational
		code and reprogram its flash-ROM.

F-4