Lantronix MPS100, LPS1-2, LPS1-T manual Server Commands

Server Commands			Frequently-used Commands
F.2 Server Commands
	Table F-1:Frequently-used Server Commands
Command		Option(s)	Description
CONNECT option		servicename	Makes a connection to a LAT service.
		LOCAL num	Makes a connection to the specified local port.
		RLOGIN host	Makes an Rlogin connection to the specified
			host (text name or numeric IP address).
		TCP host	Makes a raw TCP connection to the specified
			host (text name or numeric IP address).
		TELNET host	Makes a Telnet connection to the specified host
			(text name or numeric IP address).
DEFINE SERVER BOOTP {EN/DIS}			Enables or disables querying for a BOOTP host
			at system boot time.
DEFINE SERVER DHCP {EN/DIS}			Enables or disables querying for a DHCP host at
			system boot time.
DEFINE SERVER GATEWAY ipaddr			Specifies the host to be used as a TCP/IP gate-
			way to forward packets between networks.
			Enter an IP address.
DEFINE SERVER		BOTH	Enables incoming LAT and Telnet connections.
INCOMING option
		LAT	Enables only incoming LAT connections.
		NONE	Disables incoming connections.
		TELNET	Enables only incoming Telnet connections.
		PASSWORD	Causes the MPS to prompt for a password for
			all incoming connections.
		NOPASSWORD	Allows connections to be established without
			prompting for a password.
DEFINE SERVER IPADDRESS ipaddr			Sets the MPS’s network IP address.
DEFINE SERVER LOADHOST ipaddr			Specifies the TCP/IP host from which the MPS
			requests its run-time code.
DEFINE SERVER LOGIN PASSWORD			Sets a new password that will be required before
			incoming logins are accepted. You will be
			prompted for the new password (up to 6 alpha-
			numeric characters, case-insensitive).
DEFINE SERVER NAME “newname”			Specifies a new name for the MPS. Names are
			restricted in length; generally a name of 11 or
			fewer characters is permissible.

F-2