Lantronix LPS1-T, MPS100, LPS1-2 manual Frequently-used Commands, Conventions

F: Frequently-used Commands

This appendix lists some of the most frequently-used commands of the Micro Print Server command set. More information about the command set, including additional options, can be found in the Print Server Reference Manual located on the CD-ROM.

F.1 Conventions

Please note the following before continuing:

◆Commands are divided into Server (general), Port, and Protocol sections. Within each section, commands are listed alphabetically.

◆Commands may require privileged user status. Enter Set Privileged, then enter the privileged password when prompted.

◆When you enter a Define (or Purge) command, you must reboot the MPS for the command to take effect. Alternately, you can issue several Set commands and then a Save command to make the Set commands take effect without rebooting.

◆When the abbreviated syntax “ {EN/DIS}” is shown, you must choose either En- abled or Disabled to complete the command.

F-1