Table 10. Removal steps of battery pack
Unlock the battery release lever. Holding the battery release lever in the unlocked position pack in the direction shown by arrow 2 .
1 , remove the battery
When installing: Install the battery pack along the slide rails of the slot. Then make sure that the battery release lever is in the locked position.
1030 Hard disk drive (HDD) cover, HDD, and HDD rubber rails or solid state drive (SSD) and storage converter
For access, remove this FRU:
•“1020 Battery pack” on page 63
Attention:
•Do not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data.
•Before removing the drive, have the user make a backup copy of all the information on it if possible.
•Never remove the drive while the system is operating or is in suspend mode.
64ThinkPad X200 Tablet and X201 Tablet Hardware Maintenance Manual
