Lenovo 4222, 4220, 4215, 4219, 4221 manual 28User Guide

6.Pull on the blue handle 3 to release and remove the hard disk drive from the drive cage.

7.Flex the sides of the blue bracket to remove the hard disk drive from the bracket.

8.To install a new hard disk drive into the blue bracket, flex the bracket and align pin 1, pin 2, pin 3, and pin 4 on the bracket with the corresponding holes in the hard disk drive. Do not touch the circuit board 5 on the bottom of the hard disk drive.

Note: If you are installing a 2.5-inch hard disk drive, install the hard disk drive into a 2.5-inch to 3.5-inch hard disk drive tray first and then install the tray into the blue bracket.

Figure 21. Installing the hard disk drive into the bracket

9.Slide the new hard disk drive into the drive cage until it snaps into position.

28User Guide