Chapter 6. Using the Setup Utility
The Setup Utility program is stored in the electrically erasable programmable
Starting the Setup Utility program
To start the Setup Utility program, do the following:
1.If your computer is already on when you start this procedure, shut down the operating system and turn off the computer.
2.Repeatedly press the F1 key as you turn on the computer.
Notes:
a.If a password has been set, the Setup Utility program menu is not displayed until you type your password. See “Using passwords” for more information.
b.BIOS settings cannot be changed without the correct password.
c.The Setup Utility might start automatically when the
Viewing and changing settings
The Setup Utility program menu lists items that identify system configuration topics.
When working with the Setup Utility program menu, you must use the keyboard. The keys used to perform various tasks are displayed at the bottom of each screen.
Exiting from the Setup Utility program
When you finish viewing or changing settings, press Esc to return to the Setup Utility program menu (you might have to press Esc several times). If you want to save the new settings, press F10.
Using passwords
By using the Setup Utility program, you can set passwords to prevent unauthorized persons from gaining access to your computer and data. The types of passwords used are:
vUser Password
vAdministrator Password
vIDE Drive User Password (some computers)
vIDE Drive Master Password (some computers)
You do not have to set any passwords to use your computer. However, if you decide to set any passwords, read the following sections.
© Lenovo 2005. Portions © IBM Corp. 2005. | 55 |
