Lenovo G530 manual Select Set Supervisor Password, and press the Enter key

Models: G530

1 162
Download 162 pages 57.02 Kb
Page 35
Image 35

Chapter 2. Using your computer

Changing or removing the supervisor password

To change the password, do the following:

1Select Set Supervisor Password, and press the Enter key. The Set Supervisor Password window opens.

2Choose your Supervisor password, which can be from one to eight alphanumeric characters in any combination. Select Enter Current Password and type in the correct password. Then press the Enter key once to move to the Enter New Password field, type in a new supervisor password.

3Press the Enter key once to move to the Confirm New Password field. Retype the password you just entered to verify it.

4Commit your password to memory, and press the Enter key.

To remove password, do the following:

1Select Set Supervisor Password, and press the Enter key.

2Select Enter Current Password and type in the correct password, and finally press the Enter key thrice.

￿Note:

Make sure Password on boot is set to Enabled if you desire password protection at power on.

27

Page 35
Image 35
Lenovo G530 manual Select Set Supervisor Password, and press the Enter key