Chapter 4. Troubleshooting

Before restoring the system, initialize the settings of the BIOS Setup Utility:

1Enter BIOS Setup Utility.

2Press F9 to restore the default system settings. Select Yes and press Enter.

3Press F10 to save the system settings. Select Yes and press Enter. The computer will restart.

Restoring the factory contents from the service partition

1If possible, save all your files and shut down your operating system.

2Turn off the computer, and then turn it on again.

3When the Lenovo logo comes up, immediately press the Lenovo Care button, F11, or Enter key. The Rescue and Recovery workspace opens.

4Click Full Restore and follow the instructions on the screen.

Restoring the factory contents using the recovery discs

If a set of recovery discs is enclosed with your computer, or you have created or purchased recovery discs, you can restore the factory contents by using the discs in the following procedure:

1Make sure that in the BIOS Setup Utility the startup sequence is set so that the system starts up from the recovery discs.

2Insert the Rescue and Recovery disc into the DVD drive.

61

Page 69
Image 69
Lenovo G530 manual Restoring the factory contents from the service partition