Lenovo 4242X04, NVS-4200M, 42825BU, 42421A0 manual Security menu items

Table 8. Config menu items (continued)

Menu item	Submenu item	Selection		Comments
				If you select “0”, use 60
				seconds as default timeout
				value.
				If you select “255”, waiting
				time for establishing a
				connection is unlimited.
	Console Type	•	PC-ANSI	Select the console type for
		•	VT100+	AMT.
		•	VT-UTF8	Note: This console type
				should match the Intel AMT
				remote console.

Security menu items

Table 9. Security menu items

Menu item	Submenu item	Selection		Comments
Password				Refer to “Security menu”
				on page 203 and “Using
				passwords” on page 97.
Fingerprint	Predesktop Authentication	•	Disabled	Enable or disable fingerprint
		•	Enabled	authentication before the
				operating system is loaded.
	Reader Priority	•	External ➙ Internal	If External ➙ Internal
		•	Internal Only	is selected, an external
				fingerprint reader is used
				if attached. Otherwise, an
				internal fingerprint reader
				is used. If Internal Only
				is selected, an internal
				fingerprint reader is used.
	Security Mode	•	Normal	If fingerprint authentication
		•	High	fails, you can still start
				the computer by entering
				a password. If you have
				selected “Normal”, enter a
				power-on password or a
				supervisor password; if you
				have selected “High”, enter
				a supervisor password.
	Password Authentication	•	Disabled	Enable or disable password
		•	Enabled	authentication. If high
				security mode is selected,
				this item appears.
	Reset Fingerprint Data	•	Enter	This option is used to erase
				all fingerprint data stored
				in the fingerprint reader
				and reset settings to the
				factory state (ex. Power-on
				security, LEDs, etc.) As
				a result, any power-on
				security features previously

212User Guide