Lenovo 42421A0, NVS-4200M +GCI=countrycode Countrycode, Evalue Value, Qvalue Value, Vvalue Value

Table 3. Modem command list (continued)

Command	Description	Syntax	Values
+GMR	Request Revision	+GMR
	Information
+GSN	Request Product Serial	+GSN
	Number Identification
+GOI	Request Global Object	+GOI
	Identification
+GCAP	Request Complete	+GCAP
	Capabilities List
+GCI	Country of Installation	+GCI=<country_code>	<country_code>
			8-bit country code. The value is
			the hexadecimal.
E	Echo Command	E[<value>]	<value>
			0: Disables command echo.
			1: Enables command echo.
Q	Quiet Results Codes	Q[<value>]	<value>
	Control		0: Enable result codes to the
			DTE.
			1: Disable result codes to the
			DTE.
V	Result Code Form	V[<value>]	<value>
			0: Enables short-form result
			codes.
			1: Enables long-form result
			codes.
W	Connect Message Control	W[<value>]	<value>
			0: Upon connection, the modem
			reports only the DTE speed.
			Subsequent responses are
			disabled.
			1: Upon connection, the modem
			reports the line speed, the
			error correction protocol, and
			the DTE speed, respectively.
			Subsequent responses are
			disabled.
			2: Upon connection, the
			modem reports the DCE speed.
			Subsequent responses are
			disabled.
			3: Upon connection, the modem
			reports DCE speed and the error
			correction protocol.

Chapter 2. Using your computer 61