Lenovo 42825BU Command Description Syntax Values, +FCLASS=Mode, +VCID=pmode Pmode, Nmode Mode

Table 3. Modem command list

Command	Description	Syntax	Values
Z	Reset to default	Z
	configuration
+FCLASS	Select Active Service	+FCLASS=<Mode>	<Mode>
	Class		0: Select Data Mode
			1: Select Facsimile Class 1
			Mode
			1.0: Select Facsimile Class 1.0
			Mode
			8: Select Voice Mode
+VCID	Caller ID	+VCID=<pmode>	<pmode>
			0: Disable Caller ID reporting
			1: Enables Caller ID with
			formatted presentation to the
			DTE.
			2: Enables Caller ID with
			unformatted presentation to the
			DTE.
+VRID	Report Retrieved Caller ID	+VRID=<pmode>	<pmode>
			0: Reports Caller ID with
			formatted presentation to the
			DTE.
			1: Reports Caller ID with
			unformatted presentation to the
			DTE.
\N	Operating Mode	\N<mode>	<mode>
			0: Selects normal speed
			buffered mode (disables
			error-correction mode)
			and forces &Q6 (selects
			asynchronous operation in
			normal mode.)
			1: Same as 0.
			2: Selects reliable (error
			correction) mode and forces
			&Q5 (the modem will try to
			negotiate an error corrected
			link). The modem will first
			attempt a LAPM connection and
			then MNP connection. Failure
			to make a reliable connection
			results in the modem hanging
			up.
			3: Selects auto reliable mode
			and forces &Q5 (the modem
			will try to negotiate an error
			corrected link). This operates
			the same as \N2 except failure
			to make a reliable connection
			results in the modem falling back

Chapter 2. Using your computer 59