For details, refer to the Help in the UltraNav.
Customizing the touch pad
To customize the touch pad, do as follows:
1.Press Fn+F8. A panel for UltraNav Device Settings pops up.
2.Click Manage Settings to open the Mouse properties window.
3.Click the UltraNav tab and proceed to customizing the touch pad.
For details, refer to the Help in the Utility.
Behavior of the UltraNav and an external mouse
By default, the TrackPoint and the touch pad are set to Enabled.
Note: If you want to attach an external mouse to a USB connector, select “Disabled.”
Disabling the TrackPoint or the touch pad
If you want to disable the TrackPoint or the touch pad, do either of the following:
Use the Fn+F8 key combination:
1.Press Fn+F8. A panel for UltraNav Device Settings pops up.
2.To disable the TrackPoint, select Enable touch pad only (disable TrackPoint). To disable the touch pad, select Enable TrackPoint only (disable touch pad).
3.Click Close.
Configure settings in UltraNav properties window:
For Windows 7 and Windows Vista
1.Click Start ➙ Control Panel ➙ Hardware and Sound ➙ Mouse.
2.Click UltraNav tab.
3.To disable the TrackPoint, clear the check box for Enable TrackPoint. To disable the touch pad, clear the check box for Enable touch pad.
4.Click OK.
For Windows XP
1.Click Start ➙ Control Panel ➙ Printers and Other Hardware ➙ Mouse.
2.Click UltraNav tab.
3.To disable the TrackPoint, clear the check box for Enable TrackPoint. To disable the touch pad, clear the check box for Enable touch pad.
4.Click OK.
Note: You can also open the UltraNav properties window by clicking the UltraNav icon in the task bar. For details, refer to the instructions in “Adding the UltraNav icon to the system tray” on page 42.
Adding the UltraNav icon to the system tray
For easy access to the UltraNav properties, you can add the UltraNav icon on the system tray.
To enable the display of the UltraNav icon on the system tray, do as follows:
42User Guide
