Lenovo 4242X04, NVS-4200M, 42825BU, 42421A0 manual Tvalue Value, Ivalue Value

Table 3. Modem command list (continued)

Command	Description	Syntax	Values
			to the speed buffered normal
			mode.
			4: Select LAPM error-correction
			mode and forces &Q5 (the
			modem will try to negotiate an
			error corrected link). Failure to
			make an LAPM error-correction
			connection result in the modem
			hanging up.
			5: Selects MNP error-correction
			mode and forces &Q5 (the
			modem will try to negotiate an
			error corrected link). Failure to
			make an MNP error-correction
			connection results in the modem
			hanging up.
&F	Set to Factory Defined	&F
	Configuration
&T	Local Analog Loopback	&T[<value>]	<value>
	Test		0: Terminates test in progress.
			1: Initiates local analog
			loopback, V54 Loop 3. If a
			connection exists when this
			command is issued, the modem
			hangs up. The CONNECT XXXX
			message is displayed up the
			start of the test.
I	Request Identification	I[<value>]	<value>
	Information		0: Reports product code.
			1: Reports the latest significant
			byte of the stored checksum in
			decimal.
			2: Reports OK.
			3: Reports identification codes.
			4: Reports product description
			from the .INF file.
			5: Reports Country Code
			parameter.
			6: Reports modem data pump
			model and internal code revision.
			7: Reports modem data pump
			model and internal code revision.
			8: Reports the date and the time
			of the modem driver build.
			9: Reports Country.
+GMI	Request Manufacturer	+GMI
	Information
+GMM	Request Model	+GMM
	Information

60User Guide