Lenovo RD530, RD630, RD330 manual Session

The IPMI Serial contains the following options:

Table 8. IPMI Serial

Option	Comments
Connection	Sets the IPMI serial connection mode from a drop-down list. Available values are Direct Connect
Mode Settings	Basic Mode and Direct Connect Terminal Mode.
Baud Rate	Sets the IPMI serial baud rate (data speed) from a drop-down list. Available values are 9600 bps,
	19.2 kbps, 38.4 kbps, 57.6 kbps, and 115.2 kbps.
Flow Control	Sets the Flow control value from a drop-down list. Available values are None and RTS/CTS
	Flow Control.
Channel Privilege	Sets the channel privilege level from a drop-down list. Available levels are Administrator,
Level Limit	Operator, and User.

The IPMI Settings provides remote configuration over LAN. To activate IPMI remote configuration by LAN, check the Enable IPMI Over LAN option, define the Channel Privilege Level Limit, and enter the Encryption Key. When you finish the configuration, click Apply Changes.

Table 9. IPMI Settings

Option	Comments
Enable IPMI Over	Enables the IPMI Over LAN when the checkbox is checked.
LAN
Channel Privilege	Sets the maximum privilege level that can be accepted on the LAN channel. Available levels are
Level Limit	Administrator, Operator, and User.
Encryption Key	Sets the encryption key. This field allows from 0 to 20 two-digit Hex characters and no spaces.

Figure 21. IPMI Serial and IPMI Settings

Session

This page displays the information about Active Sessions. Additionally, the trash icon provides the delete function for privileged users. Click Refresh to refresh the sessions status.

Chapter 6. ThinkServer Remote Management Module Web console options 25