Lenoxx Electronics Optima 3 FS Table Of Contents, Listing / Testing, Packaging List

TABLE OF CONTENTS

Important Warnings	2
Testing / Listing, EPA, Using this Manual	3
Planning Your Installation	4-9
Manufactured (Mobile) Home Installation	9
Installation	10-21
Care and Operation	22-27
Routine Maintenance	28-33
Specifications	34-36
Definitions	37
Wiring Diagram	38
Troubleshooting	39-41
Replacement Parts List / Diagrams	42-47
Optional Accessories	48
Installation Tips	49
Simple Operating Instructions	50
Safety / Listing Label and EPA Label	51-52
Ownership Records	53

LISTING / TESTING

Listing: The listing laboratory is ITS (Intertek Testing Ser- vices) and the listing mark is Warnock Hersey.

Testing: In accordance with the specifications and proce- dures listed in UL 1482 & ASTM E1509 for solid fuel room heater, this appliance has been independently tested to UL, ULC and CSA standards, report # 6658 for Advantage Optima 2 and report #476-1244 for Advantage Optima 3. UL 1482 states requirements for installations as a free- standing room heater, or hearth insert for masonry or listed factory built (zero clearance) fireplaces. The safety-listing label is located on an inside hopper surface of the pellet stove. Please read this safety label carefully. It contains important information about installation and operation of this appliance. This appliance is tested and listed for resi- dential installation according to current national and local building codes as:

•A Freestanding Room Heater

•A Manufactured (mobile) Home Heater

EPA (Environmental Protection Agency)

Status: EPA Exempt - Pellet appliances that are de- signed with the combustion air supply exceeding the 35 to 1 (by weight) ratio are exempt from EPA regulations and are “non-affected facilities.”

PRODUCT IS SUBJECT TO CHANGE WITHOUT NO- TICE.

CONGRATULATIONS ON THE PURCHASE OF YOUR NEW PELLET STOVE MANUFACTURED BY LENNOX HEARTH PRODUCTS.

When you purchased your new pellet stove, you joined the ranks of thousands of concerned indi- viduals whose answer to their home heating needs reflects their concern for aesthetics, efficiency and our environment. We extend our continued support to help you achieve the maximum benefit and enjoy- ment available from your new pellet stove.

It is our goal at Lennox Hearth Products to provide you, our valued customer, with an appliance that will ensure you years of trouble free warmth and pleas- ure.

Thank you for selecting a Lennox Hearth Products stove as the answer to your home heating needs.

Sincerely,

All of us at Lennox Hearth Products

PACKAGING LIST

The assembled pellet stove model Optima 2 FS, Optima 3 FS and Optima 3 INS are packaged with an accessory package, which contains the following:

One - Installation and operation instructions manual. One - Warranty.

One - Power cord.

One- Control board – Optima 3 INS only.

One - Screw, #8 x ½” tek (for mounting control board)

–Optima 3 INS only.

One - Grate scraper. One - Video

One - Lower trim One - Wall thermostat.

One - Roll of thermostat wire.

Two- Leveling bolts, ¼-20 x 3” – Optima 3 INS only. One - Door Handle (removable)

One - Fireplace Warning Label (see page 8)

Surround Kit (For Optima 3 INS Only)

(Purchased separately, see page 48) kit is packaged with: One - Top surround panel.

One - Left surround panel.

One - Right surround panel with door. One - Left side trim.

One - Right side trim. One - Top trim.

Two - Corner keys (“L” shaped surround trim brackets).

USING THIS MANUAL

Please read and carefully follow all of the instructions found in this manual. Please pay special attention to the safety instructions provided in this manual. The home- owner’s Care and Operation Instructions included here will assure you have many years of dependable and en- joyable service from your appliance.

PAGE 3