Sensor, Paper Select Removal

1.Remove the top cover. Go to “Covers, Top Removal” on page 4-8.

2.Remove the print unit. Go to “Print Unit Removal” on page 4-28.

3.Turn the print unit upside down.

4.Remove the 4 small screws securing the paper select sensor to the left side frame. Go to “Sensors Removals” on page 4-43.

Sensor, Paper Present Removal

1.Remove the top cover. Go to “Covers, Top Removal” on page 4-8.

2.Remove the print unit. Go to “Print Unit Removal” on page 4-28.

3.Turn the print unit upside down.

4.Remove the small screw securing the paper present sensor to the bottom frame. Go to “Sensors Removals” on page 4-43.

1.Remove the lower feed roller. Go to “Roller, Lower Feed Removal” on page 4-41.

2.Remove the paper present flag, or the top-of-form flag from the paper guide. Go to “Sensors Removals” on page 4-43.

Repair Information 4-45