24xx
| FRU | Action |
|
|
|
1 | Paper Select | With the paper select lever in the cut sheet |
| Sensor | position, do the following: |
|
| • Try to load a cut sheet with Load/Unload. |
|
| (This button should not work) |
|
| • If paper loads, go to “Paper Select Sensor |
|
| Service Check” on page |
|
|
|
2 | Paper Feed | If the paper does not feed, do the following: |
|
| • Remove the ASF. |
|
| • Be sure the base printer feeds paper |
|
| correctly. |
|
| • If the base printer does not feed paper |
|
| correctly, go to “Paper Feed Service |
|
| Check” on page |
|
|
|
3 | Gear Train | Be sure the ASF drive gear on the inside right |
|
| side frame of the printer rotates. |
|
| Inspect the right side gear train for damage or |
|
| debris. |
|
| Remove the ASF right cover and ensure that |
|
| all the gears are in good condition. |
|
|
|
4 | Combination Lock | Install the ASF and press FormFeed. |
| Mechanism | If the picker drive shaft does not rotate, replace |
|
| |
|
| the combination lock mechanism. |
|
|
|
5 | Left and Right | If the ASF picker rollers rotate but a single |
| Hoppers | sheet is not picked, inspect the springs and |
|
| corner separators on the left and right hoppers. |
|
| Be sure the paper load lever is in the correct |
|
| position. |
|
|
|
Diagnostic Information
