24xx
Print Test
The print test helps you test and troubleshoot the printer. To start the print test:
1.Paper must be at the print position; test does not print if paper is parked.
2.Press and hold Line Feed and turn the printer on.
3.Release Line Feed when the printing starts.
4.To interrupt the printer test:
a.Press Start/Stop. The test stops after a complete line of characters prints.
b.Press Start/Stop to continue the test sample.
5.To stop the printer test, turn the printer off.
If the print test fails, go to “Start” on page
Note: The short horizontal lines at the top of the sample are a test of each printhead wire numbered in sequence, from top to bottom.
Diagnostic Aids
