Lexmark 24XX-100 Tractor 2 Service Check, Beeps and Blinking Ready, Paper, Font and Pitch LEDs

24xx

Tractor 2 Service Check

The Tractor 2 in-place sensor opens during installation, when its actuator touches the printer cover.

The home sensor detects the position of the slider:

•When Tractor 2 is selected, the motor-driven Tractor 2 slider pushes the printer sub slider cam lever to engage the printer gear train which drives the Tractor 2 tractors.

•When the Tractor 2 is deselected, the motor retracts the slider, disengages the Tractor 2 gear drive, and reengages the printer tractors.

10 Beeps and Blinking Ready, Paper, Font and Pitch LEDs

Tractor 2 home sensor never made after turning the printer off and then on, or made at the wrong time.

(The same error indication is used for carrier home failure.)

	FRU	Action
1	Tractor 2	Remove the Tractor 2 and turn the printer off
	Home Sensor	and then on again to determine if the fault is in
		the printer or Tractor 2.
		If the gear teeth chatter just before the beeps,
		replace the home sensor.

Diagnostic Information 2-33