Lexmark X466de Copying multiple pages onto a single sheet, Creating a custom job job build, 110

6Select one of the following:

•Between Copies

•Between Jobs

•Between Pages

7Touch Done.

8Touch Copy It.

Copying multiple pages onto a single sheet

In order to save paper, you can copy either two or four consecutive pages of a multiple-page document onto a single sheet of paper.

Notes:

• The Paper Size must be set to Letter, Legal, A4, or B5 JIS.

• The Copy Size must be set to 100%.

1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.

2If you are loading a document into the ADF, then adjust the paper guides.

3On the home screen, touch Copy.

4Select a duplex setting.

5Touch Options.

6Touch Paper Saver.

7Select the desired output.

8Touch Print Page Borders if you want a box drawn around each page of the copies.

9Touch Done.

10Touch Copy It.

Creating a custom job (job build)

The custom job or job build is used to combine one or more sets of original documents into a single copy job. Each set may be scanned using different job parameters. When a copy job is submitted and Custom Job is enabled, the scanner scans the first set of original documents using the supplied parameters, and then it scans the next set with the same or different parameters.

The definition of a set depends on the scan source:

•If you scan a document on the scanner glass, a set consists of one page.

•If you scan multiple pages using the ADF, a set consists of all scanned pages until the ADF becomes empty.

•If you scan one page using the ADF, a set consists of one page.

For example:

Copying

110