Lexmark g12 Adjusting Power Saver, Using the Embedded Web Server, Using the printer control panel

Models: 13C1262 636 431 X464de 13C0084 13C1265 X46X n12 wh1 hn1 g02 13C1102 13C0086 X466de X466dte g12 hn2 63W n11 wh2 g01 g11

1 317
Download 317 pages 2.81 Kb
Page 72
Image 72

4Touch Eco-Mode.

5Touch the arrows to select a setting.

6Touch Submit.

Submitting changes appears.

Adjusting Power Saver

To save energy, you can decrease the number of minutes before the printer enters Power Saver mode. Available settings range from 1–240 minutes. The factory default setting is 30 minutes.

Using the Embedded Web Server

1Type the printer IP address into the address field of your Web browser.

Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section.

2Click Settings, and then click General Settings.

3Click Timeouts.

4In the Power Saver box, type in the number of minutes you want the printer to wait before it enters Power Saver mode.

5Click Submit.

Using the printer control panel

1Make sure the printer is on and Ready appears.

2On the home screen, touch .

3Touch Settings.

4Touch General Settings.

5Touch the down arrow until Timeouts appears.

6Touch Timeouts.

7Touch the arrows next to Power Saver Mode to select the number of minutes you want the printer to wait before it enters Power Saver mode.

8Touch Submit.

9Touch .

Minimizing your printer's environmental impact

72

Page 72
Image 72
Lexmark g12, X466de, X464de, 431, 63W Adjusting Power Saver, Using the Embedded Web Server, Using the printer control panel