12. OSD Select (Command2:l)
To select OSD (On Screen Display) on/off when con- trolling remotely.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 0: OSD off
Data 1: OSD on
Acknowledgement [l][ ][Set ID][ ][OK][Data][x]
13. Remote Control Lock Mode (Command2:m)
To lock the remote control and the front panel controls on the set.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 0: Lock off | Data 1: Lock on |
Acknowledgement [m][ ][Set ID][ ][OK][Data][x]
If you’re not using the remote control and front panel controls on the set, use this mode. When main power is on/off, remote control lock is released.
14. PIP / DW (Command2:n)
To control the PIP (Picture In picture)/DW.
You can also control the PIP/DW using the PIP but- ton on the remote control or in the PIP/DW menu.
Transmission [k][n][ ][Set ID][ ][Data][Cr]
Data 0:PIP/DW off | Data 1: PIP |
Data2: DW1 | Data3: DW2 |
Data5: POP |
|
Acknowledgement [n][ ][Set ID][ ][OK][Data][x]
15. PIP Position (Command2:q)
To select sub picture position for PIP.
You can also adjust the sub picture position using POSITION button on the remote control or in the PIP/DW menu.
Transmission [k][q][ ][Set ID][ ][Data][Cr]
Data 0: Right down on screen
Data 1: Left down on screen
Data 2: Left up on screen
Data 3: Right up on screen
Acknowledgement [q][ ][Set ID][ ][OK][Data][x]
16. Treble (Command 2 :r)
To adjust treble.
You can also adjust treble in the SOUND menu.
Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
Refer to ‘Real data mapping 1’. See page 86.
Acknowledgement [r][ ][Set ID][ ][OK][Data][x]
17. Bass (Command 2 : s)
To adjust bass.
You can also adjust bass in the SOUND menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
Refer to ‘Real data mapping 1’. See page 86.
Acknowledgement [s][ ][Set ID][ ][OK][Data][x]
18.Balance (Command2:t) To adjust balance.
You can also adjust balance in the SOUND menu. Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 64
Refer to ‘Real data mapping 1’. See page 86 Acknowledgement [t][ ][Set ID][ ][OK][Data][x]
19.Colour Temperature (Command2:u) To adjust colour temperature.
You can also adjust CSM in the PICTURE menu.
Transmission [k][u][ ][Set ID][ ][Data][Cr]
Data 0: Cool 1: Normal 2: Warm 3: User
Acknowledgement [u][ ][Set ID][ ][OK][Data][x]
20.Red Adjustment (Command2:v)
To adjust red in colour temperature. Transmission [k][v][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 50
Refer to ‘Real data mapping 2’. See page 86 Acknowledgement [v][ ][Set ID][ ][OK][Data][x]
21.Green Adjustment (Command2:w) To adjust red in colour temperature.
Transmission [k][w][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 50
Refer to ‘Real data mapping 2’. See page 86 Acknowledgement [w][ ][Set ID][ ][OK][Data][x]
22.Blue Adjustment (Command2:$) To adjust red in colour temperature.
Transmission [k][$][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 50
Refer to ‘Real data mapping 2’. See page 86 Acknowledgement [$][ ][Set ID][ ][OK][Data][x]
23 . PIP Input Select (Command 2 : y)
To select input source for sub picture in PIP/DW picture mode. You can also adjust input source for sub picture using PIP INPUT button on remote control. Transmission [k][y][ ][Set ID][ ][Data][Cr]
Date 0: TV | Date 1: AV1 |
Date 2: AV2 | Date 3: |
Date 4: AV3 | Date 5: AV4 |
Date 6: Component | Date 7: RGB |
Date 8: HDMI/DVI |
|
Acknowledgement [y][ ][Set ID][ ][OK][Data][x]
APPENDIX
85
Downloaded From
