LG Electronics 37LC2RR*, 42LC2RR*, 42PC1RR*, 50PC1RR* This feature is not available for all models

APPENDIX

APPENDIX

24.Abnormal State (Command2:z) To recognize an abnormal state.

This feature is not available for all models.

Transmission [k][z][ ][Set ID][ ][Data][ ][Cr]

Data FF: Read

Acknowledgement [z][ ][Set ID][ ][OK][Data][x]

Data 0: Normal (Power on and signal exist)

Data 1: No signal (Power on)

Data 2: Turn the set off by remote control

Data 3: Turn the set off by sleep time function

Data 4: Turn the set off by RS-232C function

Data 5: 5V down

Data 6: AC down

Data 7: Turn the set off by Fan Alarm function (option)

Data 8: Turn the set off by Off time function

Data 9: Turn the set off by Auto sleep function

* This function is “read only”.

25.ISM Method (Command1:j, Command2:p) (option)

To control the ISM method. You can also adjust ISM Method in SPECIAL menu.

This feature is not available for all models.

Transmission [j][p][ ][Set ID][ ][Data][Cr]

Data 0: Normal	Data 1: White Wash
Data2: Orbiter	Data3: Inversion

Acknowledgement [p][ ][Set ID][ ][OK][Data][x]

26.Low power (Command1:j, Command2:q) (option)

To reduce the power consumption of the monitor. You can also adjust Low power in SPECIAL menu. This feature is not available for all models.

Transmission [j][q][ ][Set ID][ ][Data][ ][Cr]

Data 0: OffData 1: On

Acknowledgement [q][ ][Set ID][ ][OK][Data][x]

27.Orbiter Time Setting (Command1:j, Command2:r) (option) To adjust orbiter operation time term.

This feature is not available for all models.

Transmission [j][r][ ][Set ID][ ][Data][ ][Cr]

Data Min: 1 ~ Max: FE

Refer to ‘Real data mapping 1’.

Acknowledgement [r][ ][Set ID][ ][OK][Data][x]

28.Orbiter Pixel Setting (Command1:j, Command2:s) (option) To adjust pixel number in orbiter function.

This feature is not available for all models. Transmission [j][s][ ][Set ID][ ][Data][Cr] Data Min: 1 ~ Max: 3

Refer to ‘Real data mapping 1’.

Acknowledgement [s][ ][Set ID][ ][OK][Data][x]

29.Picture Size Setting for Twin Picture Mode (Command 1 : j, Command 2 : t) (option)

To adjust pixel number in orbiter function.

This feature is not available for all models.

Transmission [j][t][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 20

Refer to ‘Real data mapping 1’.

Acknowledgement [t][ ][Set ID][ ][OK][Data][x]

30 . Auto Configure (Command1:j, Command2:u) (option)

To adjust picture position and minimize image

shaking automatically. It works only in RGB (PC) mode.

Transmission [j][u][ ][Set ID][ ][Data][Cr]

Data 1: To set

Acknowledgement [u][ ][Set ID][ ][OK][Data][x]

31.Programme selection (Command1:m, Command2:a) To select a programme for the main picture. Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1]

[ ][Data2][Cr]

Data 0: Min: 0 ~ Max: 63 (0 ~ C7, 200Pr is on)

Refer to ‘Real data mapping 1’. Data 1: Don’t care

Data 2: 0 : Main 1 : Sub

Acknowledgement [a][ ][Set ID][ ][OK][Data0][x]

* Real data mapping 1		* Real data mapping 2
0	: Step 0	0	: -40
		1	: -39
A	: Step 10 (Set ID 10)	2	: -38
F	: Step 15 (Set ID 15)	28 : 0
10	: Step 16 (Set ID 16)
		4E : +38
64	: Step 100	4F : +39
		50 : +40
6E	: Step 110
73	: Step 115
74	: Step 116
C7	: Step 199
FE	: Step 254
FF	: Step 255

86

Downloaded From TV-Manual.com Manuals