APPENDIX
01 . Power (Command2:a)
To control Power On/Off of the set.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off | Data 1 : Power On |
Acknowledgement [a][ ][Set ID][ ][OK][Data][x]
To show Power On/Off.
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement [a][ ][Set ID][ ][OK][Data][x]
*In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function.
02 . Input Select (Command 2 : b)
To select input source for the set.
You can also select an input source using the INPUT
SELECT button on the set's remote control.
Transmission [k][b][ ][Set ID][ ][Data][Cr]
Date 0: TV | Date 5: AV4 |
Date 1: AV1 | Date 6: Component |
Date 2: AV2 | Date 7: RGB |
Date 3: | Date 8: HDMI/DVI |
Date 4: AV3 |
|
Acknowledgement [b][ ][Set ID][ ][OK][Data][x]
|
| 03. Aspect Ratio (Command2:c) (Main picture size) | |||
|
| To adjust the screen format. (Main picture format) | |||
|
| You can also adjust the screen format using the ARC | |||
|
| (Aspect Ratio Control) button on remote control or | |||
|
| in the SCREEN menu. |
| ||
|
|
|
| ||
|
|
| Transmission [k][c][ ][Set ID][ ][Data][Cr] | ||
|
| Date 1: Normal screen (4:3) | Date 6: Original | ||
|
| Date 2: Wide screen (16:9) | Date 7: 14:9 | ||
|
| Date 3: Horizon (Spectacle) | Date 8: Full | ||
|
| ||||
|
| Date 4: Zoom |
| ||
APPENDIX |
| Acknowledgement [c][ ][Set ID][ ][OK][Data][x] | |||
* Using the PC input, you select either 16:9 or 4:3 | |||||
|
| ||||
screen aspect ratio.
04. Screen Mute (Command2:d) To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 0 : Screen mute off (Picture on)
Data 1 : Screen mute on (Picture off)
Acknowledgement [d][ ][Set ID][ ][OK][Data][x]
05. Volume Mute (Command2:e) To control volume mute on/off.
You can also adjust mute using the MUTE button on remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume mute on (Volume off)
Data 1 : Volume mute off (Volume on)
Acknowledgement [e][ ][Set ID][ ][OK][Data][x]
84
06.Volume Control (Command2:f) To adjust volume.
You can also adjust volume with the volume buttons on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to ‘Real data mapping 1 ’. See page 86
Acknowledgement [f][ ][Set ID][ ][OK][Data][x]
07.Contrast (Command2:g) To adjust screen contrast.
You can also adjust contrast in the PICTURE menu. Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to ‘Real data mapping 1’. See page 86
Acknowledgement [g][ ][Set ID][ ][OK][Data][x]
08.Brightness (Command2:h) To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to ‘Real data mapping 1’. See page 86
Acknowledgement [h][ ][Set ID][ ][OK][Data][x]
09. Colour (Command2:i)
To adjust the screen colour.
You can also adjust colour in the PICTURE menu. Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
Refer to ‘Real data mapping 1’. See page 86 Acknowledgement [i][ ][Set ID][ ][OK][Data][x]
10. Tint (Command2:j) (option)
To adjust the screen tint.
You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red : 0 ~ Green : 64
Refer to ‘Real data mapping 1’. See page 86
Acknowledgement [j][ ][Set ID][ ][OK][Data][x]
11. Sharpness (Command2:k)
To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
Refer to ‘Real data mapping 1’. See page 86 Acknowledgement [k][ ][Set ID][ ][OK][Data][x]
Downloaded From
