LG Electronics 47WT30MS, 55WT30MS, 42WT30MS OPTION Settings, English, Customizing Settings

CUSTOMIZING SETTINGS 47

OPTION Settings

1Press SETTINGS to access the main menus.

2Press the navigation buttons to scroll to OPTION and press OK.

3Press the navigation buttons to scroll to the setting or option you want and press OK.

- To return to the previous level, press BACK.

4When you are finished, press EXIT.

When you return to the previous menu, press BACK.

OPTION		Move	OK
	• Language		ꔋ
	• ISM Method	: Normal
	• DPM Select	: On
	• Fail Over	: Off
	• Factory Reset
	• Set ID	: 1
	• Tile Mode
	• PIP/PBP
	• Key Lock	: Off

•USB Content Recovery : Off

•Product/Service Info.

ENGLISH

The available option settings are described in the following:

Setting		Description
Language	To choose the language in which the control names are displayed.
ISM Method	A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods
	could result in a image burn remaining even when you change the image. Avoid allowing a fixed
	image to remain on the screen for a long period of time.
	Setting
	Normal	Leave on normal if you don't foresee image burn in being a problem.
	Orbiter	May help prevent image burn. However, it is best not to allow any fixed image
		to remain on the screen. To avoid a permanent image on the screen, the
		screen will move every 2 minutes.
	Inversion	This function inverts the panel color of the screen. The panel color is
		automatically inverted every 30 minutes.
	White Wash	White wash fills the screen with solid white. This helps removes permanent
		images burned into the screen. A permanent image may be impossible to clear
		entirely with white wash.
DPM Select	A user can choose to turn the power saving mode on / off.

			NOTE
		yyYou can set Energy Saving to Off or set the length of time before entering Energy Saving
		mode to 5 sec./10 sec./15 sec./1 min./3 min./5 min./10 min.
		yyIt makes a little difference according to your environment.
		yyIt may not be supported depending on the model.
Fail Over	If there is no input signal, it automatically switches to another input with signal.
	Setting
	Off			Stops auto switch of the input source.
	Auto			Switches to another input source with video signal if no video signal comes
				from the current input source.
	Manual			Selects the priority of input source for auto switch.
				When several input sources are found, the input source with a higher priority
				will be selected.
Factory Reset	Select this option to return to the default factory settings.
Set ID	You can assign a unique Set ID NO (name assignment) to each product when several products
	are connected for display. Specify the number (1 to 255) using the button and exit. Use the
	assigned Set ID to individually control each product using the Product Control Program.