LG Electronics 47WT30MS English, Controlling The Multiple Product, Tile Mode Check Command d z

			CONTROLLING THE MULTIPLE PRODUCT 89
37. Fail Over Input Select (Command: m j)		40. Tile Mode Check (Command: d z)
To select the input source for auto switch.			To check Tile Mode status.
* This command is only available when the fail over
			Transmission
(auto) mode is set to Custom.
			[d][z][ ][Set ID][ ][Data][Cr]
	Transmission		Data	FF: Check Tile Mode	status.
	[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
			** It may not be supported depending on the model.
	[ ][Data4][ ][Data5][Cr]		Acknowledgement
Data 1 to 5 (Priority 1 to 5)
			[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
	60: RGB
			Data1	00: Tile Mode Off
	70: DVI-D
				01: Tile Mode On
	90: HDMI(HDMI1)
			Data2	00 to 0F: Tile Row
	C0: Display Port
			Data3	00 to 0F: Tile Column
	91: HDMI2/SDI

*The number of data items differs depending on the model.

	Acknowledgement
	[j][ ][SetID][ ][OK/NG][Data1][Data2][Data3][Data4]
	[ ][Data5][x]
		41. Tile ID (Command: d i)
			To set Tile ID.
			Transmission
			[d][i][ ][Set ID][ ][Data][Cr]
			Data 01 to E1: Tile ID 01 to 225**
			FF: Check Tile ID
			** Data could not be set over (Tile Column) x (Tile
38. Reset (Command: f k)			Row).
			** It may not be supported depending on the model.
To execute the Picture, Screen, Audio and Factory
reset function.			Acknowledgement
(Screen Reset can only be performed in RGB input			[i][ ][Set ID][ ][OK/NG][Data][x]
mode.)			*NG will be return if data is over (Tile Column) x (Tile
	Transmission		Row), except 0xFF.
	[f][k][ ][Set ID][ ][Data][Cr]

Data 00: Picture Reset

01:Screen Reset

02:Factory Reset

03:Audio Reset

Acknowledgement

[k][ ][Set ID][ ][OK/NG][Data][x]

ENGLISH

39.Tile Mode (Command: d d)

To set a Tile Mode and Tile Column/ Row values.

Transmission

[d][d][ ][Set ID][ ][Data][Cr]

Data 00 to FF: 1st byte - Tile Row 2nd byte - Tile Column

*00, 01, 10, 11 means Tile Mode Off

**It may not be supported depending on the model. Acknowledgement

[d][ ][Set ID][ ][OK/NG][Data][x]

42.Tile H Position (Command: d e) To adjust the Tile Horizontal position.

*This function is available only when the Natural option of the Tile Mode is set to Off while the Tile Mode set to On.

Transmission

[d][e][ ][Set ID][ ][Data][Cr]

Data 00 to 32: -50 (Left) to 0 (Right) *Left/Right values depend on Tile H size.

**It may not be supported depending on the model. Acknowledgement

[e][ ][Set ID][ ][OK/NG][Data][x]