LG Electronics 42WT30MS, 55WT30MS English, Controlling The Multiple Product, Power Command k a

82CONTROLLING THE MULTIPLE PRODUCT

ENGLISH

01.Power (Command: k a)

To control the Power On/Off the display.

Transmission

[k][a][ ][Set ID][ ][Data][Cr]

Data 00 : Off 01 : On

Acknowledgement

[a][ ][Set ID][ ][OK/NG][Data][x]

*Only when the monitor set is fully powered on, the Acknowledgement signal is returned properly.

*There may be a certain time of delay between the Transmission and Acknowledgement signals.

02.Input Select (Command: x b)

To select the Input Source for display.

Transmission

[x][b][ ][Set ID][ ][Data][Cr] Data 20: Input (AV)

40:Component

60:RGB

70:DVI-D(PC)

80:DVI-D(DTV)

90:HDMI(HDMI1)(DTV) A0: HDMI(HDMI1)(PC) C0: Display Port(DTV)

D0: Display Port(PC)

91:HDMI2/SDI(DTV) A1: HDMI2/SDI(PC)

B0: SuperSign

Acknowledgement

[b][ ][Set ID][ ][OK/NG][Data][x]

04.Energy Saving (Command: j q) To set the Energy Saving function.

Transmission

[j][q][ ][Set ID][ ][Data][Cr] Data 00: Off

01:Minimum

02:Medium

03. Maximum

04:Auto

05. Screen Off

Acknowledgement

[q][ ][Set ID][ ][OK/NG][Data][x]

** It may not be supported depending on the model.

05.Picture Mode (Command: d x) To select the Picture Mode.

Transmission

[d][x][ ][Set ID][ ][Data][Cr] Data 00: Vivid

01:Standard

02. Cinema

03. Sport

04:Game

Acknowledgement

[x][ ][Set ID][ ][OK/NG][Data][x]

*Some input signals may not be supported depending on the model.

03.Aspect Ratio (Command: k c)

To adjust the screen format.

Transmission

[k][c][ ][Set ID][ ][Data][Cr]

Data 01: 4:3

02:16:9

04:Zoom

(AV, Component, HDMI/ DVI-D/ Display Port DTV)

09:Just scan (720p or more)

(Component, HDMI/ DVI-D/ Display Port DTV) * RGB, DVI-D, HDMI/Display Port PC mode (1:1) 10 to 1F: Cinema Zoom 1 to 16

(AV, Component, HDMI/ DVI-D/ Display Port DTV)

*Available data types differ depending on the input signal. For more information, see the aspect ratio section of the owner's manual.

*The aspect ratio may differ depending on the model's input configuration.

Acknowledgement

[c][ ][Set ID][ ][OK/NG][Data][x]

06.Contrast (Command: k g) To adjust the screen contrast.

Transmission

[k][g][ ][Set ID][ ][Data][Cr]

Data 00 to 64: Contrast 0 to 100

Acknowledgement

[g][ ][Set ID][ ][OK/NG][Data][x]