LG Electronics 42WT30MS English, Controlling The Multiple Product, FAN Fault Check Command d w

			CONTROLLING THE MULTIPLE PRODUCT 91
49. FAN Fault Check (Command: d w)		52. Key (Command: m c)
	To check the fan errors.	To send a key code of the IR remote control.
	Transmission	Transmission
	[d][w][ ][Set ID][ ][Data][Cr]	[m][c][ ][Set ID][ ][Data][Cr]
	Data FF: Read the status	Data IR_KEY_CODE
	Acknowledgement	Acknowledgement
	[w][ ][Set ID][ ][OK/NG][Data][x]	[c][ ][Set ID][ ][OK/NG][Data][x]
	Data 00: Fan fault	For a key code, see the IR Code.
	01: Fan OK	* Some key codes are not supported depending on
	02: Model without a Fan	the model.

50. Temperature Value (Command: d n)		53. OSD Select (Command: k l)
	To check the inside temperature value.	To select OSD(On Screen Display) on/off.
	Transmission	Transmission
	[d][n][ ][Set ID][ ][Data][Cr]	[k][l][ ][Set ID][ ][Data][Cr]
	Data FF: Check the status	Data 00: Off
			01: On
	Acknowledgement
	[n][ ][Set ID][ ][OK/NG][Data][x]	Acknowledgement
	[n][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]	[l][ ][Set ID][ ][OK/NG][Data][x]
	* Temperature is displayed in hexadecimal.

		54. Elapsed time return (Command: d l)
51. Remote Controller Lock/ Key Lock		To check the panel used time.
	(Command: k m)
			Transmission
	When the remote control and front keys are locked in
			[d][l][ ][Set ID][ ][Data][Cr]
	standby mode, the power cannot be turned on using
		Data FF: Read the status
	the remote control or front power button.
			Acknowledgement
	Transmission
			[l][ ][Set ID][ ][OK/NG][Data][x]
	[k][m][ ][Set ID][ ][Data][Cr]
		* Returned data means used hours in hexadecimal.
	Data 00: Off (Lock Off)
	01: On (Lock On)
	* Display will not be turned on by power on key of
	remote controller and front panel control keys, if key
	is locked on in standby mode.
	Acknowledgement
	[m][ ][Set ID][ ][OK/NG][Data][x]
	** It may not be supported depending on the model.

ENGLISH