LG Electronics 55WT30MS English, Controlling The Multiple Product, PC Power Control Command d t

CONTROLLING THE MULTIPLE PRODUCT 93

61.PC Power Control (Command: d t)

To control the PC power if the PC and the monitor are synchronized.

Transmission

[d][t][ ][Set ID][ ][Data][Cr] Data

00:Synchronized (When the monitor is off, the PC is also turned off.)

01:Not synchronized (The monitor is off but the PC is on.)

** It may not be supported depending on the model. Acknowledgement

[t][ ][Set ID][ ][OK][Data][x]

62.PC Power (Command: d s) Control the PC power.

Transmission

[d][s][ ][Set ID][ ][Data][Cr] Data 00: PC is turned off.

01:PC is turned on.

**It may not be supported depending on the model.

Acknowledgement

[s][ ][Set ID][ ][OK][Data][x]

63.Easy Brightness Control Mode (Command: s m) Selects ON/OFF of Easy Brightness Control Mode.

Transmission

[s][m][ ][Set ID][ ][Data][Cr]

Data 00: Easy Brightness Control OFF

01:Easy Brightness Control ON

*It does not work if the current time is not set up.

**It may not be supported, depending on the model.

Acknowledgement

[m][ ][Set ID][ ][OK/NG][Data][x]

64.Easy Brightness Control Schedule (Command: s s)

Sets the Easy Brightness Control Schedule.

Transmission

[s][s][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]

Data1

1. F1 - F6 (Data Reading Functions)

F1: Reads the data of the 1st Easy Brightness Control

F2: Reads the data of the 2nd Easy Brightness Control

F3: Reads the data of the 3rd Easy Brightness Control

F4: Reads the data of the 4th Easy Brightness Control

F5: Reads the data of the 5th Easy Brightness Control

F6: Reads the data of the 6th Easy Brightness Control

2.E1-E6 (Deletes One Index), E0 (Delete All Indexes)

E0: Deletes all Easy Brightness Controls

E1: Deletes the 1st Easy Brightness Control

E2: Deletes the 2nd Easy Brightness Control

E3: Deletes the 3rd Easy Brightness Control

E4: Deletes the 4th Easy Brightness Control

E5: Deletes the 5th Easy Brightness Control

E6: Deletes the 6th Easy Brightness Control

3.00-17: 00 - 23:00

Data2 00-3B: 00 - 59 minutes

Data3 00-64: backlight 0 - 100

*To read or delete the configured Easy Brightness Control list, set [Data2][Data3] to FF.

(ex1: ss 01 f1 ff ff - Reads the 1st index data from the Easy Brightness Control.

ex2: ss 01 e1 ff ff - Deletes the 1st index data from the Easy Brightness Control.

ex3: ss 01 07 1E 70 - Adds a schedule to the backlight 70 at 07:30.)

Acknowledgement

[s][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]

** It may not be supported, depending on the model.

ENGLISH