LG Electronics 42WT30MS Using the IR Receiver, Portrait Layout, English, Assembling And Preparing

10ASSEMBLING AND PREPARING

ENGLISH

Using the IR Receiver

This allows a remote control sensor to be placed in a custom location. The IR receiver is made with a magnet. Attach the magnetic sheet to the desired position on the product. It is recommended to attach it to the location illustrated in the figure below.

Portrait Layout

To install in portrait mode, rotate the set counterclockwise 90 degrees when looking from the front.

NOTE

yyDo not attach the IR receiver to the surface of the monitor or within 50 cm of it in any direction.