Configuration Options via Command Line (Cont.)
Example: MUX Bitrates Display
Slot #1 Bitrate 19.035 Mbit/s (unfiltered | 19.065 | Mbit/s) |
| ||||||||
Slot #2 Bitrate 12.658 Mbit/s (unfiltered | 12.694 | Mbit/s) |
| ||||||||
Mux #1 Output Bitrate 31.746 Mbit/s |
|
|
|
|
|
| Data currently in | ||||
|
|
|
|
|
|
|
|
|
| use by the MUX | |
Slot #4 Bitrate 19.335 Mbit/s (unfiltered | 19.359 | Mbit/s) | |||||||||
| |||||||||||
Slot #5 Bitrate 14.679 | Mbit/s (unfiltered | 14.715 | Mbit/s) |
|
| Unprocessed data | |||||
| |||||||||||
Mux #2 Output Bitrate 34.051 Mbit/s |
|
|
|
|
|
|
| ||||
Slot #8 Bitrate 13.013 | Mbit/s (unfiltered | 13.049 | Mbit/s) |
| |||||||
Slot #9 Bitrate 13.903 | Mbit/s (unfiltered | 13.933 | Mbit/s) | Data currently | |||||||
Mux #3 Output Bitrate 26.970 Mbit/s |
|
|
|
|
|
|
| output by the MUX | |||
| 6.305 Mbit/s) | ||||||||||
Slot #11 Bitrate 6.269 | Mbit/s (unfiltered |
| |||||||||
Slot #12 Bitrate 18.583 Mbit/s (unfiltered 18.614 Mbit/s) |
| ||||||||||
Mux #4 Output Bitrate 24.900 Mbit/s |
|
|
| Total amount of data (including null | |||||||
Per Mux Total Output Bitrate 38.815 Mbit/s |
|
| |||||||||
|
| packets) output per RF channel | |||||||||
| |||||||||||
Example: Raw Bitrates Display
Slot #1 Raw bitrate data 14.228 Mbit/s total 19.396 Mbit/s Slot #2 Raw bitrate data 12.537 Mbit/s total 19.390 Mbit/s Slot #3 Raw bitrate data 0 total 0
Slot #4 Raw bitrate data 17.049 Mbit/s total 19.390 Mbit/s Slot #5 Raw bitrate data 15.503 Mbit/s total 19.396 Mbit/s Slot #6 Raw bitrate data 0 total 0
Slot #7 Raw bitrate data 0 total 0
Slot #8 Raw bitrate data 13.536 Mbit/s total 19.390 Mbit/s Slot #9 Raw bitrate data 13.957 Mbit/s total 19.396 Mbit/s Slot #10 Raw bitrate data 0 total 0
Slot #11 Raw bitrate data 7.520 Mbit/s total 19.396 Mbit/s Slot #12 Raw bitrate data 18.620 Mbit/s total 19.396 Mbit/s
Total number of data bits that are not null packets
Total number of data bits in the transport stream
Configure Card Number/Channel Assignments
This option enables you to reconfigure the card number/channel assignments.
1.Access the HCS6300 Main Menu as described on page 31.
2.At the [Main] Command > prompt, type crosspt and press Enter.
The system displays the current channel assignments and prompts for the desired action, for example:
(Continued on next page)
38 |
