Antenna/Cable Connections
- For optimum picture quality, adjust antenna direction.
Connecting to an Inside Antenna Setup
●Typical wall antenna jack used in apartment buildings, connect the antenna cable as shown below. (Use the correct type of antenna cable for the type of wall antenna jack.)
Apartment Buildings |
|
|
| Turn clockwise to |
|
|
|
|
| tighten. |
|
|
|
|
| PC INPUT | ANT IN | PC |
75Ω | Round Cable | Bronze Wire | +75 Ω | SOUND | |
|
| ||||
300Ω | Flat Wire |
|
|
| |
|
|
| Antenna |
|
|
|
|
| Converter |
|
|
Wall Connection Jack |
|
| Antenna jack | ||
|
|
|
|
| |
INSTALLATION
- If you have a 75Ω round cable, insert the bronze wire and then tighten the connection nut. If you have a 300Ω flat wire, connect the twisted wire to the antenna converter and then connect the converter to the antenna jack on the TV.
- When using 75Ω round cable, do not bend the bronze wire. Doing so may cause poor picture quality.
Connecting to an Outdoor Antenna Setup
●This type of antenna is commonly used in single family dwellings.
Single Family Home
VHF Antenna | Turn clockwise to |
|
|
tighten. |
|
| |
| PC INPUT | ANT IN | PC |
75Ω | Round Cable | +75 Ω | SOUND |
|
|
UHF | Bronze Wire |
Antenna |
|
300Ω Flat Wire
Antenna | Antenna jack | |
Converter | ||
|
-In poor signal areas, to get better picture quality, install the antenna as
shown to the right. |
|
|
- If antenna is split for two TVs, use |
|
|
signal splitter for connection. | VHF | UHF |
PC INPUT | ANT IN | PC |
| +75 Ω | SOUND |
Signal
Amplifier
13
